IC technical library

T5577 (ATA5577) RFID products and specifications

A programmable low frequency transponder IC, commonly specified as T5577. Match the exact ATA5577 revision and programmed mode to the reader.

Specify T5577 (ATA5577) in a finished Roxtron product

Roxtron manufactures the product formats listed below with this IC option. Select the physical format to review its dimensions, materials, chip specifications and production requirements.

IC specification summary

SpecificationDetails
Semiconductor ICATA5577
Interface / protocolConfigurable LF identification interface
Reference variantATA5577C; confirm the complete IC order code
IC frequency range100–150 kHz
EEPROM organization363 bits: 11 blocks of 32 data bits and one lock bit
User blocks7 × 32 bits; block 7 is used for the password when password mode is enabled
Modulation optionsManchester, Biphase, FSK, PSK and direct coding; configuration dependent
Memory protectionBlock locking and optional 32 bit password mode
Reference revisionMicrochip / Atmel 9187H, July 2014
Catalog aliasesT5577

The numerical specifications here refer to ATA5577C. They do not establish that every product described as T5577 uses the same silicon revision. Confirm the complete IC part number in the approved order.

Select the modulation, data rate and block configuration for the installed reader. Password mode and locking are not equivalent to cryptographic challenge response authentication.

Reserve the password block when calculating application data capacity. Verify programmed data before applying irreversible block locks.

Semiconductor technical references

How to interpret product and semiconductor specifications

T5577 (ATA5577) product configurations

Compare construction and dimensions within each format. IC availability depends on the selected antenna, size and approved order specification.

T5577 (ATA5577) smart cards

T5577 (ATA5577) rfid & nfc labels

T5577 (ATA5577) key fobs

T5577 (ATA5577) wristbands

T5577 (ATA5577) disc & embedded tags

Reader compatibility and manufacturing qualification

Validate the modulation, bit rate and identifier format with the installed low frequency reader. NFC phones do not read 125 kHz credentials. For programmed formats, agree a sample identifier and confirm how the host system interprets it.

Select a finished product above for format specific guidance on dimensions, attachment, antenna placement and operating conditions.

State your required product model, IC order code, printed identifiers, encoding format, initial volume and delivery destination. Roxtron confirms the complete production specification and quotation before manufacture.

Request a quotation